Breaker Repair & Electrical Troubleshooting
Tripping breakers, dead outlets, flickering lights — diagnosed and fixed by licensed electricians. $195 covers the first two hours.
- 40 Years in Business
- 4.9 ★ · 131+ Google Reviews
- TECL #40498
- Licensed, Insured & Bonded
- 36 Electricians on Staff
Breaker Repair
A Breaker That Trips Once Is Working. One That Trips Every Day Isn't.
A circuit breaker is a safety device. When it trips, it's cutting power because something on that circuit drew more current than it should — and that's the breaker doing exactly its job. The problem isn't the trip. The problem is what caused it.
Repeated tripping usually comes down to one of four things: too much load on one circuit, a failing breaker that's gotten weak with age, a short circuit somewhere in the wiring, or a ground fault. Only one of those is fixed by replacing the breaker. The rest take an electrician who can trace the circuit and find the actual fault.
This is the single most common call we get, and we've been running it in Hood and Parker Counties since 1986.
How It Works
What a Troubleshooting Call Looks Like
A licensed electrician comes out, walks the circuit, and isolates what's actually causing the fault — not just what's showing symptoms. The $195 service call covers the first two hours, which is enough to diagnose the large majority of problems and fix many of them on the spot.
If the repair is bigger than that — a panel that's failing, a run of wire that needs replacing — you get a price before we go any further. Nothing gets done that you haven't agreed to. Our labor carries a one-year warranty, and financing is available through Acorn.
FAQ
Frequently asked questions
Need an electrician today?
Call and talk to someone in our Granbury office — not an answering service.
Call (817) 279-7777Repeated tripping usually means one of four things: too much load on the circuit, a breaker that's worn out and tripping early, a short circuit in the wiring, or a ground fault. Only the second is solved by swapping the breaker — the rest need an electrician to trace the circuit and find the fault.
The trip itself isn't — that's the breaker protecting you. What matters is the cause. An overloaded circuit is a nuisance; a short or a ground fault is a fire risk. And a breaker that's stopped tripping when it should is the worst case, because the protection is gone.
$195 covers the first two hours, which is enough to diagnose most problems and fix many on the spot. If the repair is larger, you'll get a price before we go further.
If the breaker is genuinely bad, replacing it fixes the symptom. The risk is that it usually isn't — you replace a good breaker, the tripping continues, and the actual fault is still in the wall. Panel work also carries real shock and arc-flash risk.
Someone needs to let us in and point us at the problem, but you don't have to hover. We'll walk you through what we found before we leave.
Usually one of three things: a poor connection somewhere on the circuit, an overloaded circuit, or a problem in the fixture itself. Lights that dim briefly when a big appliance kicks on can also point to a panel or service issue. Occasional flicker from one lamp is a fixture problem; persistent or whole-room flickering is worth a call, because loose connections generate heat.
Get it fixed right the first time.
Licensed electricians, a one-year labor warranty, and financing available through Acorn.